Clean Spaces Start with the Right Supplies

Agar Super Nova Buff‑Free Floor Sealer 1L‑20L ‑ High-Gloss, Non-Slip Finish for Vinyl, Timber & Terrazzo Floors

Agar Super Nova is a super-glossy, rock-hard floor sealer for vinyl, sealed timber and terrazzo floors that holds its shine even without buffing, yet still responds well to burnishing. Mop on in 2-5 coats. Available in 1L, 5L and 20L. In stock now at Nova Cleaning Supplies, Melbourne’s trade cleaning chemical wholesaler.

Brand

Agar

pH Level

8.3 – 9.5

SKU No.

SUPN1, SUPN5, SUPN20

Size
  • 1L
  • 5L
  • 20L
Dimension
Tag
Product Code
  • SUPN1
  • SUPN5
  • SUPN20
Types of product design
Model
Description

What Is Agar Super Nova?

Agar Super Nova is a super-glossy, rock-hard floor sealer for vinyl, sealed timber and terrazzo floors. It is so tough and mark-resistant that it holds its shine even without buffing, yet it still responds well to burnishing when a machine is available. Super Nova is Agar’s dedicated buff-free sealer in its hard floor care range, alongside Duro, 3D-Gloss and Tuff Gloss.

Key Benefits of Agar Super Nova

  • Innovative polymer technology forms a tough film that holds its shine even without buffing
  • Will not discolour
  • Non-slip finish, tested to AS 4663-2013
  • Dramatically lifts the standard of shine on floors that receive minimal maintenance
  • Designed to save time and money on floors that cannot be regularly buffed

How Does Agar Super Nova Work?

Agar Super Nova is mopped on directly, with no dilution ratio required, and builds a tough, rock-hard film across two to five coats. Because the film is engineered to hold its gloss on its own, floors can be maintained without a buffing machine, though Super Nova will also respond well to being buffed for sites that do have burnishing equipment on hand.

How to Apply Agar Super Nova

Before applying, remove any adhesive, built-up polish, wax or other soiling using Ultrastrip, Demolish or STR-36, then rinse the floor, allow it to dry and fringe-mop to remove dust. Mop on 2-5 coats of Agar Super Nova, allowing 20-30 minutes drying time between coats, then allow the final coat to harden overnight before opening the floor to traffic. Do not apply Agar Super Nova to a very cold floor of 9°C or less.

Step Detail
Prep Strip old polish/wax with Ultrastrip, Demolish or STR-36, rinse, dry, fringe-mop dust
Coats 2-5 coats, mopped on directly
Between coats 20-30 minutes drying time
Final cure Allow to harden overnight before foot traffic
Application limit Do not apply to floors at 9°C or below

Agar Super Nova covers approximately 40-50 m² per litre per coat.

What Surfaces Can Agar Super Nova Be Used On?

Agar Super Nova is a non-slip polish for vinyl, sealed timber and terrazzo floors. It repels scuffs, scratches and traffic marks and is ideal for floors that receive minimal maintenance, since it holds its shine without needing a buffing machine.

Acrylic sealers such as Agar Super Nova are not suitable for use on non-porous ceramic or porcelain tiles. Before sealing ceramic tiles, pre-test the sealer first: lay two coats of Agar Super Nova on one tile, let it dry, then press adhesive packaging tape onto the tile and rip it off. If the sealer stays bonded to the tile it is safe to use across the floor; if the polish peels off, the tiles cannot be sealed with Super Nova and Agar Stone Block should be used instead.

Agar Super Nova ‑ Product Specifications

Brand Agar
Product Type Buff-Free Floor Sealer
Product/SKU Codes SUPN1 (1L), SUPN5 (5L), SUPN20 (20L)
Sizes Available 1L, 5L, 20L
pH Level 8.3-9.5 (as supplied)
Coverage Rate 40-50 m² per litre per coat
Application Method Mop on directly, no dilution required; 2-5 coats
Buffing Holds shine without buffing; also responds well to burnishing where equipment is available
Slip Resistance Passes AS 4663-2013 dry slip test per Agar’s product data sheet; mean dynamic coefficient of friction 0.75
Hazard Classification GHS Warning, Eye Irritation Category 2 (H319 ‑ causes serious eye irritation), Skin Sensitisation Category 1 (H317 ‑ may cause an allergic skin reaction)

Why Buy Agar Super Nova from Nova Cleaning Supplies?

Nova Cleaning Supplies is a Melbourne-based trade wholesaler stocking the full Agar range at competitive trade pricing. We carry Agar Super Nova ready to ship across Melbourne in 1L, 5L and 20L, with volume pricing available for cleaning contractors and facilities managers who need a low-maintenance, high-gloss finish for vinyl, timber and terrazzo floors that cannot be buffed on a regular schedule.

Need Bulk Pricing on Agar Super Nova?

Talk to our team about trade pricing on Agar Super Nova across all sizes.

Contact Us
Call 1300 518 051

Frequently Asked Questions About Agar Super Nova

What is Agar Super Nova used for?

Agar Super Nova is a super-glossy, rock-hard floor sealer for vinyl, sealed timber and terrazzo floors that holds its shine even without buffing.

Do I need to buff Agar Super Nova?

No. Agar Super Nova is designed to hold its shine even without buffing, though it will also respond well to being buffed if a machine is available.

How many coats of Agar Super Nova do I need?

Mop on 2-5 coats of Agar Super Nova, allowing 20-30 minutes drying time between coats, then allow the final coat to harden overnight.

Is Agar Super Nova diluted with water?

No dilution ratio is specified by Agar. Agar Super Nova is mopped on directly as supplied.

What is the coverage rate for Agar Super Nova?

Agar Super Nova covers approximately 40-50 m² per litre per coat.

What floors can Agar Super Nova be used on?

Agar Super Nova is suitable for vinyl, sealed timber and terrazzo floors. It is not suitable for non-porous ceramic or porcelain tiles without a tape adhesion pre-test.

Is Agar Super Nova slip resistant?

Yes, Agar Super Nova passes the AS 4663-2013 dry slip resistance test with a mean dynamic coefficient of friction of 0.75.

What sizes does Agar Super Nova come in?

Agar Super Nova is available in 1L (SUPN1), 5L (SUPN5) and 20L (SUPN20) sizes, all stocked by Nova Cleaning Supplies.

Related Products