Agar STR‑36 Super‑Concentrate Floor Stripper 5L‑20L ‑ Heavy-Duty Sealer & Polish Remover for Vinyl, Terrazzo, Marble & Ceramic Floors

What Is Agar STR‑36?

Agar STR-36 is a super-concentrated floor stripper with a powerful formula for ripping through old films and build-ups of hardened floor sealer, allowing all traces to be rinsed away. It is ideal for stripping semi-permanent sealer basecoats that resist normal strippers, as well as thick coatings of polish and edge build-ups.

Key Benefits of Agar STR-36

• Powerful stripping action, even on stubborn coatings
• Rips through old polish, heavy build-ups and semi-permanent sealers
• Thoroughly removes sealers in one application, minimising re-stripping
• Works best in cold water
• No ammonia smell
• Contains no caustic powders
• Low foaming, suitable for auto-scrubbers and mopping
• Leaves the floor ready for recoating

How Does Agar STR-36 Work?

Agar STR-36 rapidly breaks down and penetrates acrylic sealer, polish and wax films, including well-cured, aged, thick films and edge build-up, reducing the amount of machine scrubbing needed to get back to a clean floor.

Dilution Rates for Agar STR-36

Agar STR-36 is diluted according to the job at hand. Always use cold water for best results.

How to Apply Agar STR-36

Mop the diluted STR-36 solution over the sealer and allow 5-10 minutes for it to activate, keeping the floor wet with solution throughout (add more solution if it starts to dry out). Avoid splashing onto painted surfaces, timber or carpet. Scrub with a black or emerald pad on a slow-speed scrubbing machine, then mop up or wet-vacuum the resulting slurry. Rinse the floor three times with clean water; on porous floors, adding vinegar or Agar Neutralizer to the middle rinse is recommended to help neutralise any residual alkalinity.

What Surfaces Can Agar STR-36 Be Used On?

Agar STR-36 is suitable for vinyl, terrazzo, marble, ceramic and quarry tile floors. It is not recommended for rubber floors. On linoleum and timber floors, always dilute to a minimum of 1:20 and take care to avoid splashing onto timber, paint or carpet during application.

Agar STR‑36 ‑ Product Specifications

Why Buy Agar STR-36 from Nova Cleaning Supplies?

Nova Cleaning Supplies is a Melbourne-based trade wholesaler stocking the full Agar range at competitive trade pricing. We carry Agar STR-36 ready to ship across Melbourne in 5L and 20L, with volume pricing available for cleaning contractors and facilities managers who need a powerful, general-purpose stripper for old sealer and polish build-up. For heavier, more stubborn stripping jobs, our team can also advise on Agar Demolish as an alternative.

Frequently Asked Questions About Agar STR-36

What is Agar STR-36 used for?

Agar STR-36 is a super-concentrated floor stripper for removing old floor sealer films, heavy polish build-ups and semi-permanent sealer basecoats from hard floors.

What dilution ratio should I use for Agar STR-36?

Dilute 1:4 with cold water for heavy build-ups, 1:8 for normal stripping, and a minimum of 1:20 on linoleum or timber floors.

How long does Agar STR-36 need to dwell on the floor?

Allow 5-10 minutes dwell time, keeping the floor wet throughout, before scrubbing with a black or emerald pad.

Can Agar STR-36 be used on vinyl floors?

Yes, Agar STR-36 is suitable for use on vinyl floors, along with terrazzo, marble, ceramic and quarry tile.

Can Agar STR-36 be used on linoleum or timber floors?

Yes, but always dilute to a minimum of 1:20 and avoid splashing the solution onto timber, paint or carpet during application.

Can Agar STR-36 be used on rubber floors?

No, Agar STR-36 is not recommended for use on rubber floors.

Is Agar STR-36 corrosive?

Yes. Agar STR-36 is classified GHS Danger for skin and eye corrosion, and requires splash-resistant goggles with a face shield and impermeable gloves, overalls or apron during use.

What sizes does Agar STR-36 come in?

Agar STR-36 is available in 5L (STR5) and 20L (STR20) sizes, both stocked by Nova Cleaning Supplies.