Agar Matte Finish Low‑Sheen Floor Sealer 5L – Strippable Matte Polish for Vinyl, Timber, Stone, Terrazzo & Concrete
Agar Matte Finish Sealer is a water-based, low-sheen floor polish that protects floors from wear and cuts down on sun-glare. Mop on 3-5 coats undiluted; fully strippable for easy recoating. Available in 5L. In stock now at Nova Cleaning Supplies, Melbourne’s trade cleaning chemical wholesaler.
| Brand | Agar |
|---|---|
| pH Level | 8.0 – 9.0 |
| SKU No. | MAT5 |
- 5L
- MAT5
- MAT20
What Is Agar Matte Finish Sealer?
This water-based floor polish is tough and long-wearing, drying down to a non-reflective, low-sheen look. It protects floors from wear while cutting down on sun-glare, and is fully strippable so the coating can be replaced whenever a fresh finish is needed.
Key Benefits of Agar Matte Finish Sealer
- Cures to a very low-sheen coating with no reflective glare
- Requires minimal stirring, easy to lay
- Clear and colourless dried film
- Non-slip when dry
- Hard-wearing, tough coating that lasts under heavy traffic
- Produces a uniform, streak-free coating
- Fully strippable for easy recoating
- Non-flammable, water-based formula
How Does Agar Matte Finish Sealer Work?
Agar Matte Finish Sealer is a low-sheen acrylic floor polish formulated for maximum toughness and mark-resistance. Because it is fully strippable, coatings can be removed and replaced whenever desired, which is a major benefit in hospitals and nursing homes where floors need regular refinishing. Many architects also specify low-sheen floor coatings in new buildings because they reduce glare and give interior spaces a softer look.
How to Apply Agar Matte Finish Sealer
Strip any old finish first using a suitable stripper, and always strip new floors before the first sealing. Rinse and dry the floor, then fringe-mop to remove dust. Stir Agar Matte Finish Sealer with a flat stirrer before use and mop on 3-5 coats undiluted, straight from the container.
| Step | Guidance |
| Dilution | Used neat (undiluted) |
| Coats | 3-5 coats, mop applied |
| Time between coats | 20-40 minutes |
| Final cure | Allow to harden overnight |
| Coverage rate | 40-50 m² per litre |
Do not apply Agar Matte Finish Sealer when the floor temperature is 9°C or below. Maintain the finished floor by cleaning with a suitable autoscrubbing detergent. Do not buff or burnish the floor, as this will increase gloss and work against the deliberate low-sheen, matte effect.
What Surfaces Can Agar Matte Finish Sealer Be Used On?
Where sun-glare is a problem inside a building, the sealer does an excellent job of cutting down glare and reflections. Any normal floor can take it, including concrete, terrazzo, stone, timber and vinyl.
Agar Matte Finish Sealer ‑ Product Specifications
| Brand | Agar |
| Product Type | Low-Sheen, Strippable Floor Sealer |
| Product/SKU Codes | MAT5 (5L) |
| Sizes Available | 5L |
| pH Level | 8.0 – 9.0 (as supplied) |
| Coverage Rate | 40-50 m² per litre |
| Application Method | Mop, 3-5 coats, undiluted |
| Hazard Classification | GHS Warning, Skin Sensitisation Category 1 (H317 ‑ may cause an allergic skin reaction); non-flammable; not scheduled under the SUSMP |
Why Buy Agar Matte Finish Sealer from Nova Cleaning Supplies?
We carry Agar Matte Finish Sealer ready to ship across Melbourne in 5L, with volume pricing available for cleaning contractors, schools, hospitals and facilities managers who need a reliable low-sheen, strippable floor sealer for vinyl, timber, stone, terrazzo and concrete floors.
Agar Matte Finish Sealer Technical Data
| Colour | Milky off-white liquid |
|---|---|
| Odour | Faint ammonia odour |
| pH | 8.0 – 9.0 Coverage: 40 – 50 sq meters per litre |
| Australian Standard | AS 4663 |
| Flammability | Non-flammable |
Agar Matte Finish Sealer Safety Data Sheet (SDS) & Product Data Sheet
Frequently Asked Questions About Agar Matte Finish Sealer
What is Agar Matte Finish Sealer used for?
Agar Matte Finish Sealer is a water-based floor polish that dries to a low-sheen, non-reflective finish, protecting floors from wear while cutting down on sun-glare.
How many coats of Agar Matte Finish Sealer do I need?
Mop on 3-5 coats undiluted, allowing 20-40 minutes between coats and letting the final coat harden overnight.
Is Agar Matte Finish Sealer diluted with water?
No. Agar Matte Finish Sealer is used neat, straight from the container, with no water dilution.
What is the coverage rate for Agar Matte Finish Sealer?
Agar Matte Finish Sealer covers approximately 40-50 m² per litre.
Can I buff or burnish Agar Matte Finish Sealer?
No. Agar Matte Finish Sealer should not be buffed or burnished, as this will increase gloss and reduce the deliberate low-sheen, matte effect. Maintain it with a suitable autoscrubbing detergent instead.
What floors can Agar Matte Finish Sealer be used on?
Agar Matte Finish Sealer is suitable for all normal floors, including vinyl, timber, stone, terrazzo and concrete.
Is Agar Matte Finish Sealer strippable?
Yes, Agar Matte Finish Sealer is fully strippable, so the coating can be removed and replaced whenever a fresh finish is needed.
What sizes does Agar Matte Finish Sealer come in?
Agar Matte Finish Sealer is available in a 5L pack (MAT5), stocked by Nova Cleaning Supplies.
Where can I get the SDS for Agar Matte Finish Sealer?
Use the download buttons in the SDS section of this page to get the current Agar Matte Finish Sealer documents from Agar.
Order Agar Matte Finish Low‑Sheen Floor Sealer 5L in Bulk
Get wholesale pricing on Agar Matte Finish Low‑Sheen Floor Sealer 5L, fast delivery across Melbourne and Victoria, and friendly advice from the Nova Supply team.
- Wholesale & bulk pricing
- Fast Melbourne delivery
- Wholesale accounts available
Related Products
