Clean Spaces Start with the Right Supplies
Agar Flash Dry Fast‑Drying Glass & Window Cleaner 750ml‑20L ‑ Streak-Free, Antibacterial Spray & Wipe Formula for Glass, Chrome & Shiny Surfaces
Agar Flash Dry evaporates fast for streak-free glass and window cleaning with less wiping. Ready to use, no dilution needed. Suitable for glass, chrome, stainless steel and perspex. Available in 750ml, 5L and 20L. In stock now at Nova Cleaning Supplies, Melbourne’s trade cleaning chemical wholesaler.
| Brand | Agar |
|---|---|
| pH Level | 8.6 +/- 0.5 |
| SKU No. | FLD750, FLD5, FLD20 |
| Perfume | Floral Scented Cleaning Agents |
Size
- 750ml
- 5L
- 20L
Dimension
Tag
Product Code
- FLD750
- FLD5
- FLD20
Types of product design
Model
Description
What Is Agar Flash Dry?
Agar Flash Dry is a ready-to-use glass and window cleaner built around one idea: less wiping. The formula evaporates far quicker than a standard glass cleaner, so smudges, fingerprints and everyday grime lift away with a light spray and a quick wipe, rather than a long rubbing session to chase streaks off the surface. It comes straight out of the bottle with no mixing or dilution required.
Key Benefits of Agar Flash Dry
- Evaporates fast, cutting down on wiping and buffing time
- Lifts fingerprints, oily smudges and general soiling from glass and shiny surfaces
- Leaves a streak-free, residue-free finish
- Helps reduce dust-cling with an antistatic effect
- Formulated to kill 99.9% of germs on the surfaces it’s used on
- Light floral fragrance
- Not classified as a Transport Dangerous Good
- Won’t damage window tint film
- Works across a wide range of shiny surfaces, not just glass
How Does Agar Flash Dry Work?
Flash Dry is built on a blend of alcohol-based solvents and low-residue surfactants carried in a water base. Sprayed onto a soiled surface, this combination breaks down oily films and releases dirt from glass, chrome and similar finishes. Because the alcohol content flashes off quickly, there’s far less liquid left to chase around with a cloth, which is where most of the time saving comes from compared to a standard spray-and-wipe glass cleaner.
How to Use Agar Flash Dry
Flash Dry is supplied ready to use, so there’s no dilution step. Spray a light, even coat directly onto the surface and wipe dry with a paper towel or a clean, lint-free cloth using a circular motion. For glass or windows with heavier build-up, more than one pass may be needed. If a surface has heavy grease or grime that doesn’t lift easily, Agar’s own guidance points to a dedicated deep-clean product used with a squeegee rather than pushing Flash Dry beyond its intended light-duty, maintenance-clean role.
| Step | Detail |
| Spray | Apply a light, even mist directly onto the surface |
| Wipe | Wipe dry immediately with paper towel or a lint-free cloth, using a circular motion |
| Repeat if needed | Go over heavily soiled areas a second time |
| Heavy soiling | Switch to a dedicated deep-clean product and squeegee for stubborn build-up rather than repeated passes of Flash Dry |
What Surfaces Can Agar Flash Dry Be Used On?
Flash Dry is designed for glass, chrome and other shiny, hard surfaces, including windows, tinted glass, mirrors, display cabinets, tabletops, benchtops, stainless steel, perspex, poker machine screens, and vehicle windscreens on cars, trucks and buses. It’s rated safe for use on window tint film, which isn’t the case for every glass cleaner.
Agar Flash Dry – Product Specifications
| Brand | Agar |
| Product Type | Glass and Window Cleaner |
| Product/SKU Codes | FLD750 (750ml), FLD5 (5L), FLD20 (20L) |
| Sizes Available | 750ml, 5L, 20L |
| pH Level | 8.6 +/- 0.5 as supplied per Agar’s Product Data Sheet (Agar’s Safety Data Sheet lists a broader as-supplied range of 5.0-8.0, so check the current product label if an exact figure matters for your site) |
| Appearance | Transparent, pale aqua-blue liquid |
| Fragrance | Floral, with an alcohol note |
| Dilution | None required, ready to use |
| Application Method | Spray directly onto the surface, then wipe dry with paper towel or a lint-free cloth |
| Transport Classification | Not classified as a Dangerous Good for transport |
| Hazard Classification (SDS) | GHS Warning; Eye Irritation Category 2 (H319, causes serious eye irritation) |
| Recommended PPE | Eye or face protection when spraying; gloves recommended if extended skin contact is likely |
Why Buy Agar Flash Dry from Nova Cleaning Supplies?
Nova Cleaning Supplies stocks the full Agar cleaning range at trade pricing for Melbourne businesses, and Agar Flash Dry is one of our regular movers for sites that need glass and shiny surfaces looking sharp without burning through labour hours on wiping. We carry all three pack sizes, from a 750ml trigger bottle for smaller sites through to 20L for larger commercial and cleaning contractor operations, with fast delivery around Melbourne and volume pricing available for bulk orders.
Need Bulk Pricing on Agar Flash Dry?
Talk to our team about trade pricing on Agar Flash Dry.
Frequently Asked Questions About Agar Flash Dry
What is Agar Flash Dry used for?
It’s a ready-to-use glass and window cleaner for removing fingerprints, smudges and everyday soiling from glass, chrome and other shiny surfaces, with a fast-evaporating formula that cuts down on wiping.
Do I need to dilute Agar Flash Dry before use?
No, it’s supplied ready to use. Spray it directly onto the surface and wipe dry with paper towel or a lint-free cloth.
Is Agar Flash Dry safe on tinted windows?
Yes, it’s rated safe for use on window tint film, along with glass, chrome, stainless steel and perspex.
Is Agar Flash Dry classified as a hazardous product?
It isn’t classified as a Dangerous Good for transport, but its Safety Data Sheet does classify it as an eye irritant (Category 2, H319), so eye or face protection is recommended when spraying.
What sizes does Agar Flash Dry come in?
Agar Flash Dry is available in 750ml (FLD750), 5L (FLD5) and 20L (FLD20), all stocked by Nova Cleaning Supplies.
Does Agar Flash Dry leave streaks on glass?
No, it’s formulated to leave a streak-free, residue-free finish once wiped dry.
What should I use for heavily soiled glass instead of Flash Dry?
Flash Dry is designed for light, everyday maintenance cleaning. For heavier grease or grime build-up, Agar recommends a dedicated deep-clean glass product applied with a squeegee rather than repeated passes of Flash Dry.
What surfaces can I use Agar Flash Dry on?
Glass, windows, mirrors, chrome, stainless steel, perspex, display cabinets, tabletops, benchtops, poker machine screens and vehicle windscreens.
Related Products
Cleaning Chemicals,Spray & Wipe Cleaning Products,Spray & Wipe Surface Cleaners
